Lightweight Portable Power Source

The new CAT Field Tester is a lightweight portable power source for field testing Mortise and Cylindrical locks, Motorized and Solenoid driven exit devices, Electric strikes, etc. that require 12- 24VDC voltage. It is the perfect tool installers who are working on electrified hardware and want to test the product after installation. Or a great way of troubleshooting when you’re hardware is not working properly to quickly diagnose the issue!

Cutsheet

CAT Field Tester Cutsheet

Installation Manual

CAT Field Tester Installation Instruction

Integrates Electronic Door Hardware for Use with Auto Operators, Vestibules, Phone Entry and Access Control Systems

The DS1 delay/sequencer board offers a switching network that is ideal for (de)energizing an electrified locking device then, after an adjustable time, activating an automatic door operator. It is also suitable for other timing functions such as door sequencing in one or both directions, or anywhere a timing relay is required. For Telephone Entry system applications, the DS1 offers a direct connection to the entry panel, simplifying wiring and eliminating the need for and isolating relay.

Cutsheet

DS1 Cutsheet

Installation Manual

DS1 Installation Instruction

DS1+ Installation Instruction

Multi-Function Door Sequencing Relay Board

The Command Access DS1-X is a multi-function Door Sequencing Relay Board that features versatility with 13 programmable logic functions; two-button programming combined with dual seven-segment display provides simple setup; two 3-AMP relays and one 1-AMP relay, all with built-in surge suppresion, eliminates the need for external components with installing some electric locking devices; and wet output with AC/DC voltage for powering an electric locking device directly from the module.

Cutsheet

DS1-X Cutsheet

Installation Manual

DS1-X Installation Instruction

UL/CSA Linear with 1-I/0 Power Supply

The PS1 is a heavy duty, high quality, low cost solution for powering a single electric latch pullback exit device. The solid-state design ensures years of trouble-free operation. This linear power supply delivers 24VDC current which is ideal for the extreme in-rush requirement of most solenoid driven electric latch retracting exit devices. The power supply comes housed in a sturdy, yet compact metal enclosure.

Cutsheet

PS1 Cutsheet

Installation Manual

PS1 Installation Instruction

UL 6E/CSA Linear with 4-I/0 Power Supply

The PS204/204B power supplies input 110-120VAC and deliver (2) amps @ 24VDC to (4) PTC fused outputs. It also provides (4) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks.

Cutsheet

PS204/204B Cutsheet

Installation Manual

PS204/204B Installation Instruction

UL 6E/CSA Linear with 1-I/0 Power Supply

The PS210 power supply inputs 110-120VAC and deliver (1.5) amps @ 24VDC to (1) PTC fused output. It also provides (1) solid-state input trigger, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for solenoid and motor driven exit devices, electric locks, electric strikes, and mag locks.

Cutsheet

PS210 Cutsheet

Installation Manual

PS210 Installation Instruction

UL 6E/CSA Linear with 2-I/0 Power Supply

The PS220/220B power supplies input 110-120VAC and deliver (2) amps @ 24VDC to (2) PTC fused outputs. It also provides (2) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for solenoid and motor driven exit devices, electric locks, electric strikes, and mag locks.

Cutsheet

PS220/220B Cutsheet

Installation Manual

PS220/220B Installation Instruction

UL 6E/CSA Linear with 4 or 8-I/0 Power Supply

The PS440B/480B power supplies input 110-120VAC and deliver (4) amps @ 24VDC to (4) or (8) PTC fused outputs. It also provides (4) or (8) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for solenoid and motor driven exit devices, electric locks, electric strikes, and mag locks.

Cutsheet

PS440B/480B Cutsheet

Installation Manual

PS440B/480B Installation Instruction

Replacement Relay Board for Von Duprin PS873 and PS914

When Von Duprin discontinued the PS873 power supply and the add-on boards associated with that power supply. Command Access developed a replacement board manufactured with similar characteristics to PS871-2 board. The new VD2-872 board mounts to the PS873 in the same fashion as the factory original PS871-2 board. After the success of the VD2-873, we developed the VD2-914 replacement relay board that fits and functions just the same as the original factory 2RS board for the Von Duprin PS914, with the added addition of a .5A power tap. Whether it be old or new style, we got you covered!

Cutsheet

VD2 Cutsheet

Installation Manual

VD2 Installation Instruction