Concealed Power Transfer Unit

The Command Access EPT is a concealed power transfer ideal for high traffic applications, matching the Von Duprin EPT prep. It is a available in 2 or 10 wire configurations, ALUM or DURO finish, and CON connections can be added.

Cutsheet

CAT EPT Cutsheet

Installation Manual

CAT EPT Installation Instruction

Concealed Door Loop

This patented Concealed Door Loop (CDL) is a low cost method of transferring low voltage power from the door frame to the locking device. Whereas typical door loops are surface mounted and remain constantly visible, the CDL slides into the door and/or frame completely concealing itself when the door is closed.

Cutsheet

CDL Cutsheet

CDL Offset Pivot Cutsheet

Installation Manual

CDL Installation Instruction

CDL Offset Pivot Installation Instruction

Door Loop

The Door Loop (DL20) is a low cost method of transferring low voltage power from the door frame to the locking device. Door loops are commonly used with electric mortise and cylindrical locks, electric exit trims and latch pullback devices.

Cutsheet

DL20 Cutsheet

Installation Manual

DL20 Installation Instruction

Energy Transfer Hinge

The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise and cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights.

Cutsheet

ETH 3 Cutsheet

Installation Manual

ETH 3 Installation Instruction

Energy Transfer Hinge

The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise and cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights.

Cutsheet

ETH 5 Cutsheet

Installation Manual

ETH 5 Installation Instruction

Energy Transfer Monitor Hinge

The Energy Transfer Monitor Hinge (ETM) like the ETH hinge is the ideal way to pass low voltage power from the hinge jamb to the lockset. There are no exposed wires, cables or switches that can be tampered with and the hinge maintains the same appearance of a conventional non-power transfer hinge. What distinguishes it from the ETH hinge is that it has a concealed switching mechanism that monitors the position of the door.

Cutsheet

ETM 3 Cutsheet

Installation Manual

ETM 3 Installation Instruction

Energy Transfer Monitor Hinge

The Energy Transfer Monitor Hinge (ETM) like the ETH hinge is the ideal way to pass low voltage power from the hinge jamb to the lockset. There are no exposed wires, cables or switches that can be tampered with and the hinge maintains the same appearance of a conventional non-power transfer hinge. What distinguishes it from the ETH hinge is that it has a concealed switching mechanism that monitors the position of the door.

Cutsheet

ETM 5 Cutsheet

Installation Manual

ETM 5 Installation Instruction

Narrow Door Loop

The Door Loop is a low cost method of transferring low voltage power from the door frame to the locking device. Door loops are commonly used with electric mortise and cylindrical locks, electric exit trims and latch pullback devices.

Cutsheet

NDL18 Cutsheet

Energy Transfer Pivot Hinge

The Energy Transfer Pivot Hinge is available in the same wire configurations as the butt hinges. It’s a great way to pass power from the hinge jamb to the door and have no exposed wires or cords. We maintain an inventory of our own Command Access intermediate pivot hinge.

Cutsheet

Pivot Hinge Cutsheet

Installation Manual

Pivot Hinge  Installation Instruction

Swing Clear Transfer Hinge

The Command Access Energy Transfer Swingclear Hinges. The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise and cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights.

Cutsheet

Swing Clear Hinge Cutsheet

Electrified Sargent/Yale Keyed Removable Mullion System

The Command Access V-KRM-EL is an Electric Power Transfer modification of the Sargent/Yale keyed removable mullion system. This modification allows for safe transfer of power from the head of the door frame to the electric strike location(s). When needed, we maintain the ability to easily remove the mullion without damaging or needing to disconnect the power.

Installation Manual

V-KRM-EL Installation Instruction