Sargent

Sargent Documentation

Instructions for installing 480 (2 3/4″ BS) & 20-480 (2 3/8″ BS) Cylinder Deadlocks
Instructions for Installing 60-/63-/64-480 Series Deadbolt
Instructions for Installing 70-/72-/73-480 Series Deadbolt
480 Series Auxiliary Bored Locks (all functions)
400 Curved Lip Strike for ANSI A115.3 – Prefix 16
404 Strike (standard for 480 series)
408 Flat Lip Strike for ANSI A115.2 – Prefix 28
Sargent 480 Series Parts List

Installation Instructions for installing 470 Series Deadlock
406 Strike for 470 Series Auxiliary Bored Deadlock Template
470 Series Auxiliary Bored Deadlock Template
408 Flat Lip Strike for ANSI A115.2 – Prefix 28 Template

Installation Instructions for 4870 Series Dead Locks
4870 Series Mortise Deadlock (all functions) Template
4870 Deadbolt Strike for ANSI A115.5 Template
7710 Strike for ANSI A115.2 – Prefix 28 Template
7730 Deadbolt Strike Template
4870 Parts List

7800 & 8200 Series Mortise Locks with all sectional/rose trims and escutcheon trims (See Note for ’05’ Function Locks Manufactured prior to 7/06/04) Template
78-0034 Dead Bolt Strike (03,20,21,22,23 functions)
Standard and Straight Lip Mortise Strike (82-0110)

1655 Locker Lock Installation Instructions
1655 Locker Lock Template

Installation Instructions for Security SideLite Latch
SSL1 Metal Door Template (see instruction sheet for Wood Door)

Instructions to Remove Cylinder from 758 and 858 Padlock
Instructions For 6013 Padlock Weather Shield Kit
858 Series Padlock Parts List

11 Line Installation Instructions (all functions except Hotel)
11 Line Classroom Security Function Operating Instructions
Installation & Removal of 11 Line Cylinders & Levers for Arrow, Best, Falcon Interchangeable Core Cylinders & Sargent Removable Core Cylinders
Installation Instructions for 11 Line Lever Pull Trim (93, 94, 94-2 functions)
11 Line Hotel Function (11U50) Installation Instructions
Installation Instructions for 11 Line with High Security Lever Attachment (SL- option)
6300 Tailpiece Retainer Instuctions for 758/858 Padlocks,7 Line,10 Line,11 Line,6500
6010 Installation of 7600 Integra Lock Replacement Kit with 7/8/10/11 Line Locksets
Spacer for YC-Cylinder Option
30-Option Lever to Accept Schlage Fixed Core Cylinder
T-Zone (All Functions except pulls) Template
11 Line Lever Lock (93 & 94 Functions)
808 Strike for ANSI A115.2 – 28 Prefix
800 Strike for ANSI 115.3 – Standard
Bored Lock 11 Line Parts Manual

10X Line Cylindrical Lockset Installation Instruction
Installation Instructions Latch Extension Assembly For 3-3/4″ and 5″ Backsets for 10 & 10x Line
Installation Instructions for SARGENT 10X Line with BHW Trim
Installation Instructions for 10X Line Electrified Bored Lock
10X Line Template
10X Line Electrified Lever Template
808 ANSI Strike Template
800 T-Strike Template
505 Full Lip Strike Template
10X Line w BHW Trim Template
10x Line Parts List

Installation Instructions for 10 Line Lever Locks
Instruction Sheet for 10G26 and10G38 Function
Installation Instructions for 7 Line/10 Line Lever Handles for Sargent Removable Core or Arrow/Best/Falcon Interchangeable Core
Instructions for Installing 10 Line Lever Locks for 1-3/8″ Door (1- Prefix)
6300 Tailpiece Retainer Instuctions (Degree and XC tail piece) for 758/858 Padlocks, 7 Line, 10 Line, 11 Line, 6500
Degree Removable Core Tail Piece (Degree and XC tail piece) Installation for 10 Line Electromechanical Locks
Instruction Sheet – SF Prefix
Instructions for installing 7 & 10 Line Bored Locks (30- prefix)
Installation Instructions for 10G70 & 10G71 Electro-Mechanical Bored Lock for 1 3/4″ door With ElectroLynx Connector System
6010 Installation of 7600 Integra Lock Replacement Kit with 7/8/10/11 Line Locksets
Installation Instructions Latch Extension Assembly For 3-3/4″ and 5″ Backsets for 10 & 10x Line
10 Line (All Functions) Template
10G70/10G71 Bored Lock Electric Functions Template
Door Manufacturers Template for all Profile Series 10 Line Cylindrical Lock Template
808 Strike for ANSI A115.2 – 28 Prefix Template
800 Strike for ANSI 115.3 – Standard Template
IN Series Trim 10L Bored Lock Door Manufacturers Template
Bored Lock 10 Line Parts List

Instructions for Installing 7 Line Cylindrical Lock
Installation Instructions for 7 Line/10 Line Lever Handles for Sargent Removable Core or Arrow/Best/Falcon Interchangeable Core
6300 Tailpiece Retainer Instuctions (Degree and XC tail piece) for 758/858 Padlocks,7 Line,10 Line,11 Line,6500
Instruction Sheet – SF Prefix
Instructions for installing 7 & 10 Line Bored Locks (30- prefix)
6010 Installation of 7600 Integra Lock Replacement Kit with 7/8/10/11 Line Locksets
7 Line (All Functions and Prefixes) Template
808 Strike for ANSI A115.2 – 28 Prefix Template
800 Strike for ANSI 115.3 – Standard Template
505 Full Lip Strike Template
7 Line Parts Manual

Installation Instructions for DL Lever Lock
505 Full Lip Strike Template
8 Line 808 Strike for ANSI A115.2 – 28 Prefix Template
DL Series Lock 93, TB-93 & 94 Functions Template
800 Strike for ANSI 115.3 – Standard Template
DL Series Parts List

RDL Lever Lock with Simpli Roseless Trim Installation Instructions
Door Manufacturer’s Template for RDL: 93 and 94 Functions Template
Door Manufacturer’s Template for RDL Tubular Lock
800 Strike for ANSI 115.3 – Standard
505 Full Lip Strike Template
808 Strike for ANSI A115.2 Template

Instructions for installing 6500 Line Single & Double Lever Pull
Instructions for removal and insertion of SARGENT Plastic Construction Plugs for 6500
6500 Line (All Functions and Prefixes)
808 Strike for ANSI A115.2 – 28 Prefix
800 Strike Template

8X Line Installation Instructions
Dummy Trim Instructions
8x Grade 1 Dummy Trim Wood or Metal Door Preparation Template
8x Grade 1 Wood or Metal Door Preparation Template
808 Strike for ANSI A115.2 – 28 Prefix Template
800 Strike for ANSI 115.3 – Standard Template

Instructions for Installing 6 Line Bored Lock/Cylinder Reassembly
Instructions for Installing 6 Line Bored Lock/Cylinder Reassembly – French
6 Line (All Functions Except Knob Pulls) Template
808 Strike for ANSI A115.2 – 28 Prefix Template
505 Full Lip Strike Template
800 Strike for ANSI 115point3 – Standard Template
6 Line Parts List

Installation Instructions for 52-2593 Keypad Shroud for use with KP & Profile Series
Instructions for installing KP10G77 Line Bored Locks (Battery Operated Keypad)
KP8200 Keypad Mortise Lock Programming Instructions
Installation Instructions for Keypad Rim/Mortise Type Exit Device
Inside Trim 10-Line with Keypad 10G77
KP Series Mortise Lock Template for Metal and Wood Doors
Standard and Straight Lip Mortise Strike (82-0110)
KP8877/8878 & 12-KP8877/8878 Keypad ET Rim Type Exit Device
KP8900 & 12-KP8900 Keypad ET Mortise Exit Device
KP Series 10 Line Bored Lock for Wood Doors

PG Passport 1000 Mortise Lock Installation Instructions
PG 1000 Passport Cylindrical Installation Instructions
PG Passport 1000 Exit Device Installation Instructions
Door Manufacturer Templates for “PG” Passport 1000 8200 Mortise Lock Trim
Door Manufacturing Template for 10-Line (PG)
PG Passport 1000 W/O DPS 80 Series Template

Model #3267 Remote Power Unit for Profile Series Access Control & Exit Alarm Devices (with ElectroLynx Connector System)
Addendum Instruction for all Profile Series – Ribbon Cable Change
Keypad Programming Instructions for the Profile Series LK and v.G1.5 Locks
Profile Series v.G1.5 Cylindrical Lock Installation Instructions
Keypad Programming Instructions for the v.G1 Profile Series
Profile Series v.G1 Cylindrical Lock Installation Instructions
Proximity Card Enrollment Station Installation Instructions
SofLink Plus 5 Access Control Software User Manual
Profile Series v.G1.5 Mortise Dorm Lock Installation & Programming Instructions
Profile Series v.G1.5 Mortise Lock Installation Instructions
Profile Series v.G1 Mortise Lock Installation Instructions
Profile Series Mortise Lock With Studio Collection Levers
Profile Series v.G1 Exit Device Installation Instructions
Door Manufacturers Template for all Profile Series 10 Line Cylindrical Lock
Door Manufacturers Template for all Profile Series 8200 Mortise Lock
Low Profile Mortise Lock 91-8200 Remote Power Option
Low Profile Mortise Lock Trim for 8277 & 8279
Template for Profile Series 8800

Installation & Programming Instructions for Profile Series with RF Technology
Installation Instructions for 52-2593 Keypad Shroud for use with KP & Profile Series
Addendum Instruction for all Profile Series – Ribbon Cable Change
Keypad Programming Instructions for the Profile Series LK and v.G1.5 Locks
Addendum Instruction Sheet for Low Profile Locks (Cylindrical/Mortise/Exit Devices)
Installation Instructions for Low Profile Mortise Locks
Profile Series Mortise Lock With Studio Collection Levers
Instructions for Using Microprox Proximity Tags with Low Profile PK & PA Access Control Products
Installation Instructions for Low Profile Cylindrical Locks
Installation Instructions for Profile Series Exit Device
Door Manufacturers Template for all Profile Series 8200 Mortise Lock
Low Profile Mortise Lock 91-8200 Remote Power Option
Low Profile Mortise Lock Trim for 8277 & 8279
Door Manufacturers Template for all Profile Series 10 Line Cylindrical Lock

IN Series Trim 7900, 8200, R8200 Mortise Lock Door Manufacturers Template
IN Series Trim 10L Bored Lock Door Manufacturers Template

Auxiliary Power Cable Instructions For Hard Powering Passport 1000 P2 Installations (91- Option)
Door Manufacturer Templates for “P2” Passport 1000 8200 Mortise Lock Trim
Passport 1000 P2 Cylindrical Lock with Door Position Switch Template
Door Manufacturing Template for 10-Line P2 Without Door Position Switch Template
P2 Passport 1000 W/DPS 80 Series Template
P2 Passport 1000 W/O DPS 80 Series Template
Template for PASSPORT 1000 P2 W/PS 8900

HARMONY H1/H2 8200 TEMPLATE
H1/H2-8700 HARMONY SERIES SURFACE VERTICAL ROD EXIT DEVICE TRIM
HARMONY H1/H2 8900 TEMPLATE
HARMONY MD- HI/H2 8600 TEMPLATE
HARMONY MD/WD H1/H2 8800 TEMPLATE
Template for NB8700 Surface Vertical Rod for Harmony
Harmony MD/WD H1/H2 10 Line Template

SARGENT SE Series SN200/210 Trim for 8200 Series Moritse Lock Door Manufacturers Template
SARGENT SE Series Trim for 10 Line Bored Lock Door Manufacturers Templates
SE Series SN200/210 Series Trim 8600 CVR Exit Device Door Manufacturers Template
SE Series SN200/210 Series Trim 8700 SVR Exit Device Door Manufacturers Template
SE Series Trim SN200/210 Series 8800 Rim Device Manufacturers Template
SE Series Trim SN200/210 Series 8900 Mortise Exit Device Door Manufacturers Template
SE Series SN200/210 Series Trim NB-8700 SVR Exit Device Door Manufacturers Template

Door Manufacturing Template for 10-Line P1 Without Door Position Switch
Door Manufacturer Templates for “P1” Passport 1000 8200 Mortise Lock Trim
P1 Passport 1000 W/O DPS 80 Series Template
Template for PASSPORT 1000 P1 W/DPS 8900
Template for PASSPORT 1000 P1 W/OUT DPS 8900
Template for PASSPORT 1000 PG 8900
P1 Passport 1000 W/DPS 80 Series Template

Installation Instructions for SARGENT 10X Line with BHW Trim
10X Line Cylindrical Lock with BHW Trim Template

Sargent 8200 Mortise Lock with BHW Trim Installation Instructions
7800 & 8200 Series Mortise Locks with all sectional/rose trims and escutcheon trims (See Note for ’05’ Function Locks Manufactured prior to 7/06/04)
78-0034 Dead Bolt Strike (03,20,21,22,23 functions)
815 Open Back Strike
Standard and Straight Lip Mortise Strike (82-0110)
Template for 8200 & 9200 BHW Trim

Instructions for Installing 8200 Mortise Lock with BHL Trim
BHL Freewheeling Trim Retrofit (For Trim purchased prior to August 2019)
7800 & 8200 Series Mortise Locks with all sectional/rose trims and escutcheon trims (See Note for ’05’ Function Locks Manufactured prior to 7/06/04)
78-0034 Dead Bolt Strike (03,20,21,22,23 functions)
815 Open Back Strike
Standard and Straight Lip Mortise Strike (82-0110)
Electrified Functions (70,71,72,73 Functions) & Prefixes (RX, LX, DX) & NAC-270/271/274/275/280/281
Template for 8200 & 9200 BHD, BHL & ALP Trim

8200 ALP Mortise Lock Visual (185CALP) / Occupancy(185PALP) Indicators
8200 Mortise Lock with ALP Paddle Trim
8200 Mortise Lock with ALP Trim 130KALP Turn/184KALP Emergency Release
ALP Paddle Positive Pull (684 Kit) Instructions
Instructions for Push/Pull Marker for ALP Paddle Trim
7800 & 8200 Series Mortise Locks with all sectional/rose trims and escutcheon trims (See Note for ’05’ Function Locks Manufactured prior to 7/06/04)
Template for 8200 & 9200 BHD, BHL & ALP Trim

HP Bored Lock with ALP Push/Pull Trim
Instructions for Push/Pull Marker for ALP Paddle Trim
HP Series Bored Lock

7800 Mortise Lock with PT Paddle Trim Installation Instructions
Install PUSH/PULL Markers For 7800 PT Paddle Trim
7800 & 8200 Series Mortise Locks with all sectional/rose trims and escutcheon trims (See Note for ’05’ Function Locks Manufactured prior to 7/06/04)
7800 Lockbody Prep for Push-Pull (PT) Trim only

Template for 8200 & 9200 BHD, BHL & ALP Trim

Installation Instructions for 114/24-114/26/114 Hospital Latch (for 1-3/4″ to 2-1/4″ Thick Doors)
Installation Instructions for 115/24-115/26/115 Hospital Latch (for 1-3/4″ to 2-1/4″ Thick Doors)
114 Hospital Latch (2-3/4″, 5″, 7″ Backsets)
115 Hospital Latch (2-3/4″, 5″, 7″ Backsets)

Installation Instructions for 351 EHT Electromechanical Closer-Holder Device (Pull/Push Side)
Installation Instructions for 351 EHTD Electromechanical Closer-Holder Device (Double Egress)
351-EHT Closer/Holder Series Push Side Application (for use with 690 or 1530 Series)
351-EHT Pull Side Application Template
351-EHT Pull Side Application Template (with 690 or 1530 Stop)
351-EHT Push Side Application Template
351-EHTD Double Egress Application Template
Pull Side Application (for use with 590 or 1540 Series)
351EHT Series Parts Manual

12-2469 Fireguard Instruction Sheet
12-2479 Fireguard Instruction Sheet
12-2499 Fireguard Instruction Sheet
2469/9-2469 Fireguard Instruction Sheet
2479/9-2769 Fireguard Instruction Sheet
2499/9-2499 Fireguard Instruction Sheet
2409 Series Parts List

Installation Instructions for 9-2970/12-2970/2970 Series FIREGUARD Combination Door Closer/Holder Arm & Releasing Device w/ Double Egress
Installation Instructions for 9-2990/12-2990/2990 Series FIREGUARD
Installation Instructions for FIREGUARD 2960/9-2960/12-2960 Series Multipoint Hold Open with ‘Rigid Arms’ Pull (Hinge) Side
Installation Instructions for FIREGUARD 2980/9-2980/12-2980 Series Multipoint Hold Open with ‘Swing Free Arms’ Pull (Hinge) Side
Wiring Instructions for 2900 Series FIREGUARD Combination Door Closer-Holder and Releasing Device (with Integral Smoke Detector)
2900 Series Fireguard – Double Egress Arms
2900 Series Fireguard – Rigid & Swing Free Arms
2900 Series Push Mounting Models (regular arm)
2900 Series Parts Manual

Installation Instructions for 268 Series Concealed Door Closers
Installation Instructions for 268 Series Concealed Door Closers (with ‘CSP’ Concealed Security Package)
Installation Instructions for 268/269 Series Concealed Door Closers (with ‘CSPS/CSPD’ Door Position Switch)
268 OverHead Concealed Closer With Butt Hinges 4″ Face Frame
268 CSP Overhead Concealed Security Closer With Clear Hinges
268 CSP Overhead Concealed Security Closer With Offset Pivot Hinge
268 CSP Overhead Concealed Security Closer With Butt Or Continuous Hinges
268 CSP Overhead Concealed Security Closer With Center Hung Pivot
268 CSP Overhead Concealed Security Door Closer With Pocket Pivot
267/268 Concealed Door Closer With Butt Hinges, 2″ Face Frame
267/268 Concealed Door Closer With Center Hung Pivot,1 3/4″Door And 2″ Face Frame
267/268 Concealed Door Closer With Clear Hinges, 1 3/4″ Door And 2″ Face Frame
267/268 Concealed Door Closer With Offset Pivot, 1 3/4″ And 2″ Face Frame
267/268 OverHead Concealed Door Closer With Pocket Hinges 2″ Face Frame

269 Overhead Concealed Closer With Center Hung Pivot, 1 3/4″ Door And 2″ Face Frame
269 CSP & CSPS/CSPD Overhead Concealed Security Closer With Offset Pivot
269 CSP/CSPD Overhead Concealed Security Closer With Butt Or Continuing Hinges
269 Overhead Concealed Closer With Butt Hinges 2″ Face Frame

Installation Instructions for 278 Series Concealed Door Closers (Regular/Hold Open/Fusible Link Arms)
Instructions for Installation of 278 Series Door Closers Friction Hold Open Adjustment H & UH Arms
Instructions for Installation of 278 Series Door Closers Friction Hold Open Adjustment H & UH Arms – A2892
278 Series Overhead Concealed Closer w/”O”,”H”,”F” Arms

Installation Instructions for 281 Series Door Closers (with Regular Arms ‘O’/UO/OZ/OZA/P9) without Holder
Installation Instructions For 281 Door Closers With O10/H10/SSO Arms
Installation Instructions for 281 Series Door Closer (with ‘F’/FZ/FZA/PF9 Fusible Link Arms)
Installation Instructions for 281 Series Door Closers (with ‘H’/UH/HZ/HZA/PH9/UH Holder Arms)
Installation Instructions for 281 Series Door Closers w/CPS & CPSH Arms
Installation Instructions for 281 Series Door Closers w/OD/ODB/HD/HDB Arms
Installation Instructions for 281 Series Door Closers w/OT/OTB/HTB Arms
Installation Instructions for 281 Series Powerglide Door Closers (PSSPT Security Track)
Installation Instructions for 281 Series Powerglide Door Closers (SSPT Security Track)
Installation Instructions for 281 Series Powerglide Door Closers (with POT/POTB/PHT/PHTB Arms)
Instructions for Installation of 281 Series Door Closer with P10 &PH10 Arms
Instructions for Installation of 281 Series Door Closers w/PS & PSH Arms
Instructions for Installation of 281 Series Door Closers Friction Hold Open Adjustment H & UH Arms
Instructions for Installation of 281 Series Door Closers Friction Hold Open Adjustment H & UH Arms
281 Series Closer with ‘O, F, H’ Standard Arm on Corner Bracket
281 Series with ‘O, F, H’ Arms on Corner Bracket for Narrow Stop Frames
125-P4 Conversion Unit
281 Closer With PD10 Drop Down Parallel Arm With 590 Or 1540 Holder/Stop
281 Series Closer x ‘CPS, CPSH’ Heavy Duty Parallel Arm Application
281 Series Closer x ‘P10/PH10/SSP/SP10’ Heavy Duty Parallel Arm Application
281 Series Closer x ‘P3A’ Parallel Arm & Door frame w/Coordinator Mounted on Stop
281 Series Closer x ‘P9, PH9’ Parallel Arm Application
281 Series Closer x ‘PS, PSH’ Heavy Duty Parallel Arms
281 Series Closer x P3 Parallel Arm (for Door Frame with Narrow &/or Unreinforced Stop)
281 Series Closer x P4 Parallel Arm Application
281 Series Closer x PF9 Parallel Arm Application
281 Series x P10 Parallel Arm Application x 1536-1539 or 697-699 Holders & Stops
281 Series x P3 Parallel Arm Application x 1546-1549 or 597-599 Holders & Stops
281 Series x P9 Parallel Arm Application x 1536-1539 or 697-699 Holders & Stops
281-D Drop Plate (Parallel Arm Application)
125V Bracket For Frames With Blade Stop
281 Series Closer x ‘P4A’ Arm x 1536-1539, 1546-1549, 597-599 OR 697-699 Holders & Stops (Flush Frame Condition)
281 Series Closer x PH4 Parallel Arm Application
Pocket Mounting for 281-O Series Closer x 180 Degrees
281 Series PSSPT Security (push side)
281 Series SSPT Security, Pull Side (Track Type Application)
281 Series Closer x ‘O’ Standard Arm Application
281 Series Closer x ‘O’ Standard Arm Application x 1536-1539 Series Holders & Stops
281 Series Closer x ‘O’ Standard Arm Application x 1546-1549 Holders & Stops
281 Series Closer x ‘O’ Standard Arm Application x 597-599 Holders & Stops
281 Series Closer x ‘O’ Standard Arm Application x 697-699 Holders & Stops
281 Series Closer x ‘O/OZ/OZA/H/HZ/HZA/F/FZ/FZA’ Standard Arm Application (for low ceilings)
281 Series Closer x ‘O8 & F8’ Standard Arm Application
281 Series Closer x ‘OLC’ Standard Arm Application
281 Series Closer x F Standard Arm Application (Hold Open Fusible Link)
281 Series Closer x H Standard Arm Application
281 Series Closer x H8 Standard Arm Application
281 Series Door Closer with O10 or H10 Heavy Duty Standard Arm
281 Closer x ‘O/OZ/OZA/H/HZ/HZA/F/FZ/FZA’ Arms – Rabbeted (Top Jamb Application)
281 Series Closer (for Low Ceiling Top Jamb Application) x ‘O, OZ, OZA’ Arm x 1536-1539, 1546-1549, 597-599 OR 697-699 Holders & Stops
281 Series Closer x ‘O/OZ/OZA’ Arm x 1536-1539, 1546-1549, 597-599 OR 697-699 Holders & Stops (Top Jamb Application)
281 Series Door Closer with ‘O, H, F’ Arms for flash header (Top Jamb Application)
281-B Mounting Plate (Top Jamb Application)
281-OT Special Top Jamb Track Application
281 Series Closer x ‘OD & HD’ Double Egress Arms (Track Type Application)
281 Series Closer x ‘OT & HT’ Track Type Arm Application (pull side mounting)
281 Series Closer x ‘POT, POTB & PHT, PHTB’ Track Type Arm Application (push side mounting)
125-VF Bracket for Heavy Duty Parallel Arms (Flush Frames & Transom Panels)
SARGENT 281 351 and 1431 Series Parts Manual

Installation of 351 Series Door Closers w/’OT/OTB/HT/HTB’ Arms
Instructions For Installing 351 Hold Open Arms With Fusible Links
Instructions for Installing 351 Series Door Closers with ‘O’/UO/OZ/OZA/P9 Arms
Instructions for Installing 351 Series Door Closers with ‘OD/ODB/HD/HDB’ Arms
Instructions for Installing 351 Series Door Closers with ‘POT/POTB/PHT/PHTB’ Arms
Instructions for Installing 351 Series Door Closers with ‘UH/HZ/HZA/PH9’ Holder Arms
Instructions for Installing 351 Series Door Closers with CPS & CPSH Holder Arms
Instructions for Installing 351 Series Door Closers with OP (Double Lever Arm) & OTP (Track-Type Arm)
Instructions for Installing 351 Series Door Closers with PH10 /P10 Arms
Instructions for Installing 351 Series Door Closers with PS & PSH Holder Arms
Instructions for Installation of 351 Series Door Closers Friction Hold Open Adjustment H & UH Arms
Instructions for Installation of 351 Series Door Closers Friction Hold Open Adjustment H & UH Arms
351 Door Closer by Mortise Nut Application
351 Closer With PD10 Drop Down Parallel Arm With 590 Or 1540 Holder/Stop
351 Series Closer x ‘CPS & CPSH’ Arms (center hung pivot)
351 Series Closer x ‘P10 & P10H’ Heavy Duty Parallel Arm Application
351 Series Closer x ‘P3A’ Parallel Arm Application for Door Frame w/Coordinator Mounted on Stop
351 Series Closer x ‘P4’ Parallel Arm Application
351 Series Closer x ‘P9 & PH9’ Parallel Arm Application
351 Series Closer x ‘PS & PSH’ Arms (center hung pivot)
351 Series Closer x ‘PS & PSH’ Parallel Arm Application
351 Series Closer x CPS & CPSH Arms
351 Series Closer x P10 Arm x 1536-1539 or 697-699 Holders & Stops
351 Series Closer x P3 Arm for Door Frame with Narrow and/or Unreinforced Stop
351 Series Closer x P9 Parallel Arm Application x 1536-1539 or 697-699 Holders & Stops
351 Series Closer x PF9 Parallel Arm Application
351 Series Closer x PH4 Parallel Arm Application
351 Series w/ P3 Arm x 1546-1549 or 597-599 Holders & Stops
351-D Drop Bracket (Parallel Arm Application)
125V Bracket For Frames With Blade Stop
351 Series Closer x ‘P4’ Arm x 1536-1599 or 697-699 Holders & Stops (Flush Frame Condition)
351 Series Closer x ‘P4A’ Arm x 1546-1549 or 597-599 Holders & Stops (Flush Frame Condition)
351 Series Closer x ‘O’ Arm (Pocket Mounting Application)
351-OTP Series Door Closer Application With Butt Hinge And Wall Magnet
351-OTP Series Door Closer Application With Pocket Pivot And Wall Magnet
125-VF Bracket for Frames with 581-2 Kit Blade Stop
351 Series Closer (for low ceilings) x ‘O/OZ/OZA’ Arm x 1536-1539, 1546-1549, 597-599 or 697-699 Holders & Stops
351 Series Closer x ‘H’ Standard Arm Application
351 Series Closer x ‘O’ Standard Arm Application
351 Series Closer x ‘O8 & F8’ Standard Arm Application
351 Series Closer x ‘OLC’ Standard Arm Application
351 Series Closer x H8 Standard Arm Application
351 Series Closer x Hold Open Fusible Link Application x ‘F’ Standard Arm
351 Series Closer x Standard Application ‘O’ Arm x 1547-1549 Holders & Stops
351 Series Closer x Standard Application ‘O’ Arm x 597-599 Holders & Stops
351 Series Closer x Standard Application ‘O’ Arm x 697-699 or 1536-1539 Series Holders & Stops
351 Series Closer x ‘O, H, F’ Arms – Top Jamb Application (Low Ceiling Conditions)
351 Series Closer x ‘O, OZ, OZA’ Arm x 1536-1539, 1546-1549, 597-599 or 697-699 Holders & Stops (Top Jamb Application)
351 Series Door Closer x ‘O, H, F’ Arms (Top Jamb Application)
351-B Mounting Plate (Top Jamb Application)
351 Series Closer x Double Egress ‘OD & HD’ Arms
351 Series Closer, Pull Side ‘OT & HT’ Arms (Track Type Application)
351 Series Closer, Push Side x ‘POT/POTB & PHT/PHTB’ Arms (Track Type Application)
351-ODS Series Door Closer Application
125-VF Bracket for Heavy Duty Parallel Arms (Flush Frames & Transom Panels)
SARGENT 281 351 and 1431 Series Parts Manual

422CTB2 / 422CTHB2 Series Installation Instructions
422 Cam Action Closer with CTB2 or CTHB2 Arms
422 Cam Action Closer RETROFIT Template-421CTB/CHTB to 4
422 Cam Action Closer with PCTB2 or PCTHB2 Arms
422 Cam Action Closer RETROFIT Template-421PCTB/PCHTB to 422PCTB2/PCHTB2 Push Side
Template-422 Series Door Closer with PCTHB2 or PCTHB2 Arms

Installation Instructions for 1130 Series Door Closers (Hold Open Arm Models)
Installation Instructions for 1130 Series Door Closers (Non-Hold Open Arm Models)
1130 Series Hold Open Arms
1130 Series Non-Hold Open Arms

1331 Series Door Closer Installation Instructions with JUH (Hold Open) Arms
1331 Series Door Closer Installation Instructions with JUO (JO & JP9) Arms
Installation Instructions for 1331 Door Closer with Arm Sets (JH,JHZ and JPH9)
Installation Instructions for 1331 Door Closer with Arm Sets (JP10,JPH10,JPS,JPSH,JCPS and JCPSH)
Installation Instructions for 1331 Door Closer with Arm Sets (JO, JOZ, and JP9)
Template 1331 JP10 or JPH10
1331 Door Closer Series – JPH9 Arm with 1331-D Drop Plate (Parallel Arm Application For Narrow Space Rail Doors)
1331 Door Closer Series JP9 Parallel Arm Application with 1540 Series Overhead Stop
1331 Door Closer Series with JP9 Arm & 1331-D Drop Plate (Parallel Arm Application for Narrow Rail Doors)
1331 Door Closer Series with JP9 Parallel Arm Application
1331 Door Closer Series with JPH9 Hold Open Arm (Parallel Arm Application)
Template 1331 JP10 or JPH10 Arm with Drop Plate
Template 1331 JP9 Arm Applications
Template 1331 JP9 Arm Applications with Drop Plate
Template 1331 JPH9 Arm Applications
Template 1331 JPH9 Arm Applications with Drop Plate
Template 1331 JPS, JPSH, JCPS or JCPSH & 125JV Reinforcing Bracket
Template 1331 JPS, JPSH, JCPS or JCPSH & 125JVF D-Drop Plt
Template 1331 JPS, JPSH, JCPS or JCPSH Arm
Template 1331 JPS, JPSH, JCPS or JCPSH Arm with Drop Plate
Template 1331 JPS, JPSH, JCPS, JCPSH & 125JV with Reinforcing Bracket
Template 1331 JPS, JPSH, JCPS, JCPSH & 125JV with Bracket
1331 Door Closer Series Standard Application JO Arm with 1530 Series Overhead Stop
1331 Door Closer Series Standard Application JO Arm with 1540 Series Overhead Stop
1331 Door Closer Series with Standard Application JH Hold Open Arm
1331 Door Closer Series with Standard Application JO Arm
Template 1331 JH Regular Arm Applications
Template 1331 JO Arm Regular Arm Applications
1331 Door Closer Series – JH Arm & 1331-B Mounting Plate (Top Jamb Application for Low Ceiling Conditions)
1331 Door Closer Series Standard JH Arm (Top Jamb Application)
1331 Door Closer Series with Standard JO Arm & 1530/1540 Stop with 1331-B Mounting Plate (Top Jamb Application)
1331 Door Closer Series with Standard JO Arm (Top Jamb Application)
1331 Door Closer Series with Standard JO Arm (Top Jamb Low Ceiling Conditions Application)
Template 1331 JH, JHZ Arm Applications and Top Jamb
Template 1331 JH, JHZ Arm with Top Jamb for STD Deep Reveal
Template 1331 JO, JOZ Arm Applications and Top Jamb
Template 1331 JO, JOZ ARM for Standard and Deep Reveal

1431 Door Closer With UO/O/RO/O8/OLC/P9/RP9/P3/P3A/P4/P4A/Z/OZA Standard Duty Arms (Without Hold Open) Installation Instructions
Installation Instructions for 1431 Series Door Closers w/OT/OTB/HT/HTB Arms
Installation Instructions for 1431 Series Door Closers with OD/HD Arms
Installation Instructions for 1431 Series Door Closers with POT/POTB/PHT/PHTB Arms
Installation Instructions for 1431W Corner Bracket
Instructions for Installing 1431 Series Door Closers (with Fusible Link Holder Arms ‘F’/FZ/FZA/PF9)
Instructions for installing 1431 Series Door Closers (with Hold Open Arms ‘H’/UH/HZ/HZA/PH9)
Instructions for installing 1431 Series Door Closers with CPS/CPSH Arms
Instructions for installing 1431 Series Door Closers with P10/PH10 Arms
Instructions for installing 1431 Series Door Closers with PS/PSH Arms
Instructions for Installation of 1431 Series Door Closers Friction Hold Open Adjustment H & UH Arms
Instructions for Installation of 1431 Series Door Closers Friction Hold Open Adjustment H & UH Arms
1430 Series Closer x ‘O, F, H’ Arms on Corner Bracket for Narrow Stop frames
1430 Series Closer x ‘O/F/H’ Arms on Corner Bracket
125-P4 Conversion Unit
125-V Bracket for narrow door frames
1431 Series Closer w/’P3′ Parallel Arm x Door Frame w/Narrow or Unreinforced Stop
1431 Series Closer x ‘CPS & CPSH’ Parallel Heavy Duty Arm Application (center hung pivot)
1431 Series Closer x ‘P10/PH10’ Heavy Duty Parallel Arm
1431 Series Closer x ‘P3A’ Parallel Arm (for stop mounted coordinator)
1431 Series Closer x ‘P9 & RP9’ Parallel Arm x 1536-1539 or 697-699 Holders & Stops
1431 Series Closer x ‘P9/RP9/PH9’ Parallel Arm Application
1431 Series Closer x ‘PF9’ Parallel Arm Application
1431 Series Closer x ‘PS & PSH’ Heavy Duty Parallel Arm
1431 Series Closer x P10 Parallel Arm Application x 1536-1539 or 697-699 Holders & Stops
1431 Series Closer x P3 Parallel Arm Application x 1546-1549 or 597-599 Holders & Stops
1431 Series Closer x PS & PSH Parallel Heavy Duty Arm (center hung pivot)
1431 Series Door Closers With CPS Or CPSH Heavy Duty Parallel Arm
1431-D Drop Bracket
125V Bracket For Frames With Blade Stop
1431 Series Closer x ‘P4A’ Parallel Arm x 1546-1549 or 597-599 Holders & Stops (Flush Frame Condition)
1431 Series Closer x ‘PH4’ Parallel Arm Application
1431 Series Closer x P4 Parallel Arm x 1536-1539 or 697-699 Holders & Stops (Flush Frame Condition)
1431 Series Closer by Mortise Nut Application
1431 Series Closer x ‘H’ Standard Arm Application
1431 Series Closer x ‘H8’ Standard Arm Application
1431 Series Closer x ‘O & RO’ Standard Arm Application
1431 Series Closer x ‘O & RO’ Standard Arm Application x 1546-1549 Holders & Stops
1431 Series Closer x ‘O & RO’ Standard Arm Application x 597-599 Holders & Stops
1431 Series Closer x ‘O & RO’ Standard Arm Application x 697-699 Holders & Stops
1431 Series Closer x ‘O’/’RO’ Standard Arm Application x 1536-1539 Series Holders & Stops
1431 Series Closer x ‘O8/F8’ Standard Arm Application
1431 Series Closer x ‘OLC’ Standard Arm Application
1431 Series x Standard Arm Hold Open Fusible Link Application
1431 Series Closer (for low ceilings) x ‘O/RO/H/F’ Top Jamb Application
1431 Series Closer x ‘O, RO, OZ, OZA’ Top Jamb Application x 1536-1539, 1546-1549, 697-699, or 597-599 Holders & Stops (low ceiling)
1431 Series Closer x ‘O, RO, OZ, OZA’ Top Jamb Application x 697-699 or 1546-1549 Holders & Stops
1431 Series Closer x ‘O, RO, OZ, OZA, H, HZ, F, FZ’ Top Jamb Application
1431 Series Closer x ‘O/RO/H/F’ Top Jamb Application
1431-B Mounting Plate
1431 Series Closer x ‘OD & HD’ Track Type Application (Double Egress Arms)
1431 Series Closer x ‘POT & PHT’ Installation (Push Side Track)
1431 Series Closer x ‘OT & HT’ Pull Side Track Application
125-VF Bracket for Heavy Duty Parallel Arms (Flush Frames & Transom Panels)

Installation Instructions for 597, 598, 599 Series Holders & Stops
597, 598, 599 Series Holder & Stop Pull Side Installation
597, 598, 599 Series Holders & Stops – Mounting Group 1
597, 598, 599 Series Holders & Stops – Mounting Group 2
597, 598, 599 Series Holders & Stops – Mounting Group 3
597, 598, 599 Series Holders & Stops x 195 Angle Bracket
422 Cam Action Closer RETROFIT Template-421CTB/CHTB to 4
SARGENT 281 351 and 1431 Series Parts Manual

Installation Instructions for 697, 698, 699 Series Concealed Overhead Holders & Stops
697, 698, 699 Series Holders & Stops
697, 698, 699 Series Holders & Stops – Mounting Group 1
697, 698, 699 Series Holders & Stops – Mounting Group 2
422 Cam Action Closer RETROFIT Template-421CTB/CHTB to 4

1536/1537/1538/1539 Series Concealed Overhead Doors & Stops
1536, 1537, 1538, 1539 “H,S,F” Series Holders & Stops – Mounting Group 1
1536, 1537, 1538, 1539 Series Holders & Stops
1536, 1537, 1538, 1539 Series Holders & Stops – Mounting Group 2
422 Cam Action Closer RETROFIT Template-421CTB/CHTB to 4

Installation Instructions for 1546, 1547, 1548, 1549 Series Surface Overhead Holders & Stops
1546, 1547, 1548, 1549 Series Holders & Stops (Mounting Group 1)
1546, 1547, 1548, 1549 Series Holders & Stops (Mounting Group 2)
1546, 1547, 1548, 1549 Series Holders & Stops (Mounting Group 3)
1546-1549H,S,& F Door Holders & Stops x 145 Degree Bracket
422 Cam Action Closer RETROFIT Template-421CTB/CHTB to 4

Electromagnetic Extension Kit
Instruction Sheet for 1560 Door Release
Instruction Sheet for 1561 Door Release
Instruction Sheet for 1562 Single Door/1563 Double Door Release
Trouble-Shooting Your New Door Holder

7800 & 8200 Instructions for 185C & 185P Indicators (49-)
End of Line Resistors for EcoFlex Electrified Mortise Locks and Integrated Wiegand (Harmony, SE LP10) Installation and Wiring Instructions
Wiring Instructions for 12V & 24V Solenoid Mortise Locks with Monitoring Prefixes with ElectroLynx Connector System
Wiring Instructions for SARGENT Full Wave Bridge Rectifier (Solenoid Operated Locks)
EcoFlex™ Electrified Mortise Locks (NAC-) with High-Security Monitoring Options Installation and Wiring Instructions
Electrified Functions (70,71,72,73 Functions) & Prefixes (RX, LX, DX) & NAC-270/271/274/275/280/281
IN Series Trim 7900, 8200, R8200 Mortise Lock Door Manufacturers Template

Instructions for 7800/8200 Mortise Locks Functions
7800 & 8200 Series Mortise Lock with Sectional Trim and V Series Indicators
7800 and 8200 Series Mortise Lock Used with VN1 Escutcheon Trim and V Series Indicators
7800 & 8200 Instructions for 185C & 185P Indicators (49-)
7800/8200, 7900 & 9200 Series Mortise Locks with 1-sided Trim Only
BHD Trim for 8200 Mortise Locks
Installation Instruction Addendum 8200/7900 Mortise Lock
Installation Instructions – Anti Vandal Trim for 7800/8200/9200 Series Mortise Lock
Installation Instructions for 578 Replacement Spindle Kit
Installation Instructions for 579 Replacement Spindle Kit
Installation Instructions for 7800/8200 Mortise Lock 50-Prefix 185S Kit (Secured Indicator Rose)
Installation Instructions for 7900 & 8200 Mortise Locks with Studio Collection Levers
Installation Instructions for 8200 Lever Trim Mounting Kit
Installation Instructions for Freewheeling “FE” Escutcheon Trim
Installation Instructions for NY- Prefix (NYC Public School System)
Instruction Sheet for Keso Security System Removable Core Cylinder
Instructions for #130 Turn Knob and #184 Emergency Button
Instructions for Installing 8200 Mortise Lock with BHL Trim
Instructions for Mortising #677 & 2-677 Rabbeted Door Kits (1-3/4″ & 2-1/4″ Wood Doors)
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
Instructions for 7893/8293 and 7894/8294 Mortise Lock Dummy Trim
KP8200 Keypad Mortise Lock Programming Instructions
Standard and Straight Lip Mortise Strike (82-0110)
V Series Indicators used with VN1 Escutcheon Trim
V Series Indicators used with Sectional Trim
Template for 50- Prefix 7800/8200 Mortise Lock Series Secured Indicator Rose
Dummy Trim for 7800 & 8200 Series (93 & 94 Functions Only)
Electrified Functions (70,71,72,73 Functions) & Prefixes (RX, LX, DX) & NAC-270/271/274/275/280/281
7800 & 8200 Series Mortise Locks with all sectional/rose trims and escutcheon trims (See Note for ’05’ Function Locks Manufactured prior to 7/06/04)
Free-Wheeling Lockbodies – 8200 Mortise Lock
78-0034 Dead Bolt Strike (03,20,21,22,23 functions)
877 Open Back Strike
8200 Mortise Lock Free-Wheeling Trim (FE)
Anti-Vandal 7800/8200/9200 Series Mortise Lock “WT” Design Escutcheons (Surface Applied)
Anti-Vandal 7800/8200/9200 Series Mortise Locks AV-Prefix “CR, E, L, LN, O, SL, SN, TR” Design Rose Trim
Anti-Vandal 9200 Series Mortise Lock AV-Prefix “CE,TE,LE3” Design Escutcheons (Exposed Screws)
Anti-Vandal AV-Prefix 7800/8200/9200 Series Mortise Lock “KE2,KE4” Design Escutcheons (Concealed Screws)
Escutcheons LE1, KE1, LE3, KE3, LW1, KW1, CE and TE
Mortise Lock Escutcheons “LE2,LE4”
Mortise Lock Escutcheons (LS & KS Security Trim)
Mortise Lock Escutcheons (WT Trim – Surface Applied)
Rose Trim (E, L, LN, O, SL, SN, CR, TR Designs)
Template for 8200 & 9200 BHD, BHL & ALP Trim
Template for 8200 & 9200 BHW Trim
577/677 & 2-577/2-677 Rabbeted Door Kit
7800/8200 Thumb Turns & Emergency Releases (130, 184)

R8200 Mortise Lock with Simpli Roseless Trim Installation Instructions
Wiring Instructions for 12V & 24V Solenoid Mortise Locks with Monitoring Prefixes with ElectroLynx Connector System
Door Manufacturer’s Template for R8200 Mortise Lock
Door Manufacturer’s Template for R8200: 93 and 94 Dummy Trim

7800/8200, 7900 & 9200 Series Mortise Locks with 1-sided Trim Only
Installation Instruction Addendum 8200/7900 Mortise Lock
Installation Instructions for 7900 & 8200 Mortise Locks with Studio Collection Levers
Instructions for #130 Turn Knob and #184 Emergency Button
Wiring Instructions for 12V & 24V Solenoid Mortise Locks with Monitoring Prefixes with ElectroLynx Connector System
Dummy Trim for 7800 & 8200 Series (93 & 94 Functions Only)
7900 MORTISE LOCK (LOCK BODY ONLY)
815 Open Back Strike
877 Open Back Strike
Standard and Straight Lip Mortise Strike (82-0110)
7900 MORTISE LOCK CE, LE1, LW1 & TE ESCUTCHEONS
7900 MORTISE LOCK WT ESCUTCHEONS
IN Series Trim 7900, 8200, R8200 Mortise Lock Door Manufacturers Template

Wiring Instructions for 12V & 24V Solenoid Mortise Locks with Monitoring Prefixes with ElectroLynx Connector System
M9200 Mortise Lock Bodies (all functions)
78-0034 Dead Bolt Strike (03,20,21,22,23 functions)
Mortise Rose Trim (L,LN,SL,SN)

7800/8200, 7900 & 9200 Series Mortise Locks with 1-sided Trim Only
Installation Instructions – Anti Vandal Trim for 7800/8200/9200 Series Mortise Lock
Wiring Instructions for 12V & 24V Solenoid Mortise Locks with Monitoring Prefixes with ElectroLynx Connector System
Installation Instructions for 9200 Lever with Security Escutcheon Trim LS
Installation Instructions for 9200 Levers with Rose Trim
9200 Series Mortise Lock Bodies (all functions)
78-0034 Dead Bolt Strike (03,20,21,22,23 functions)
Standard and Straight Lip Mortise Strike (82-0110)
Anti-Vandal 7800/8200/9200 Series Mortise Lock “WT” Design Escutcheons (Surface Applied)
Anti-Vandal 7800/8200/9200 Series Mortise Locks AV-Prefix “CR, E, L, LN, O, SL, SN, TR” Design Rose Trim
Anti-Vandal 9200 Series Mortise Lock AV-Prefix “CE,TE,LE3” Design Escutcheons (Exposed Screws)
Anti-Vandal AV-Prefix 7800/8200/9200 Series Mortise Lock “KE2,KE4” Design Escutcheons (Concealed Screws)
Escutcheons LE1, KE1, LE3, KE3, LW1, KW1, CE and TE
Mortise Lock Escutcheons “LE2,LE4”
Mortise Lock Escutcheons (LS & KS Security Trim)
Template for 8200 & 9200 BHD, BHL & ALP Trim
Template for 8200 & 9200 BHW Trim
7800/8200 Thumb Turns & Emergency Releases (130, 184)

7800 & 8200 Instructions for 185C & 185P Indicators (49-)
Instructions for 7800/8200 Mortise Locks Functions
7800/8200, 7900 & 9200 Series Mortise Locks with 1-sided Trim Only
Installation Instructions – Anti Vandal Trim for 7800/8200/9200 Series Mortise Lock
Installation Instructions for 7800/8200 Mortise Lock 50-Prefix 185S Kit (Secured Indicator Rose)
Instructions for #130 Turn Knob and #184 Emergency Button
Instructions for Installing 8200 Mortise Lock with BHL Trim
Instructions for Mortising #677 & 2-677 Rabbeted Door Kits (1-3/4″ & 2-1/4″ Wood Doors)
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
Wiring Instructions for 12V & 24V Solenoid Mortise Locks with Monitoring Prefixes with ElectroLynx Connector System
Instructions for 7893/8293 and 7894/8294 Mortise Lock Dummy Trim
Dummy Trim for 7800 & 8200 Series (93 & 94 Functions Only)
Electrified Functions (70,71,72,73 Functions) & Prefixes (RX, LX, DX) & NAC-270/271/274/275/280/281
7800 & 8200 Series Mortise Locks with all sectional/rose trims and escutcheon trims (See Note for ’05’ Function Locks Manufactured prior to 7/06/04)
78-0034 Dead Bolt Strike (03,20,21,22,23 functions)
877 Open Back Strike
Standard and Straight Lip Mortise Strike (82-0110)
Anti-Vandal 7800/8200/9200 Series Mortise Lock “WT” Design Escutcheons (Surface Applied)
Anti-Vandal 7800/8200/9200 Series Mortise Locks AV-Prefix “CR, E, L, LN, O, SL, SN, TR” Design Rose Trim
Anti-Vandal 9200 Series Mortise Lock AV-Prefix “CE,TE,LE3” Design Escutcheons (Exposed Screws)
Anti-Vandal AV-Prefix 7800/8200/9200 Series Mortise Lock “KE2,KE4” Design Escutcheons (Concealed Screws)
Escutcheons LE1, KE1, LE3, KE3, LW1, KW1, CE and TE
Mortise Lock Escutcheons “LE2,LE4”
Mortise Lock Escutcheons (LS & KS Security Trim)
Mortise Lock Escutcheons (WT Trim – Surface Applied)
Rose Trim (E, L, LN, O, SL, SN, CR, TR Designs)
577/677 & 2-577/2-677 Rabbeted Door Kit
7800/8200 Thumb Turns & Emergency Releases (130, 184)
Template for 50- Prefix 7800/8200 Mortise Lock Series Secured Indicator Rose
815 Open Back Strike

Degree Removable Core Tail Piece Installation for 10 Line Electromechanical Locks

436-1 Top Loading Tool Kit Instruction Sheet
Assembly Instructions for Sargent Signature Cylinders
Instructions for Rekeying the 65-6300 Large Format Interchangeable (Removable Core) Assembly
Signature Series Information & Field Service Guide

436-1 Top Loading Tool Kit Instruction Sheet
439 FIELD CONSTRUCTION KEYING KIT
Installation Instructions For 11-(70-73-43) Small Format Interchangeable Core Cylinders
Interchangeable Core Shear Tool (Kit #431-7)
Removeable Core Shear Tool Kit #431-6 Instructions
Instructions for Rekeying the 65-6300 Large Format Interchangeable (Removable Core) Assembly

Instruction Sheet for Keso Security System Removable Core Cylinder

4101 Mail Box Cylinder
436-1 Top Loading Tool Kit Instruction Sheet
439 FIELD CONSTRUCTION KEYING KIT
Assembly Instructions for Best Type Interchangeable Core Cylinders
Instructions for Changing from Contractors (22-Split Key) System to Standard Key Operation
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
11 Line Hotel Function (11U50) Installation Instructions
Instructions for Rekeying the 65-6300 Large Format Interchangeable (Removable Core) Assembly

436-1 Top Loading Tool Kit Instruction Sheet
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
Instructions for Rekeying the 65-6300 Large Format Interchangeable (Removable Core) Assembly

Installation Instructions For 11-(70-73-43) Small Format Interchangeable Core Cylinders

Degree Technical Manual
Signature Series Information and Field Service Guide

3520 24V & 3521 12V Power Supplies Operation and Installation Instructions
3540/3550/3570/ 24V & 3541/3551/3571 12V Power Supplies Operation and Installation Instructions
4399 Exit Button (Push Plates) Installation & Operating Instructions

3520 24V & 3521 12V Power Supplies Operation and Installation Instructions
3540/3550/3570/ 24V & 3541/3551/3571 12V Power Supplies Operation and Installation Instructions
4399 Exit Button (Push Plates) Installation & Operating Instructions

TMR2 Multi-Function Timer Delay Installation and Operating Instructions
4399 Exit Button (Push Plates) Installation & Operating Instructions

4399 Exit Button (Push Plates) Installation & Operating Instructions
TMR9 Timer Off Delay Installation and Operating Instructions

4399 Exit Button (Push Plates) Installation & Operating Instructions
3520 24V & 3521 12V Power Supplies Operation and Installation Instructions
3540/3550/3570/ 24V & 3541/3551/3571 12V Power Supplies Operation and Installation Instructions

Installation, Wiring & Programming for 4301 Magnetic Card Reader
4399 Exit Button (Push Plates) Installation & Operating Instructions

Installation Instructions for 4380 Series Horn
4399 Exit Button (Push Plates) Installation & Operating Instructions

Installation Instructions for 4291 & 4292 Series Microprocessor Controlled Keypads
4399 Exit Button (Push Plates) Installation & Operating Instructions

Installation Instructions for 4153 & 4253 Switch Locks
4399 Exit Button (Push Plates) Installation & Operating Instructions

Installation Instructions for 4299 Wall Switch
Instruction Sheet for Drilling the Door Position Switch Holes in the Frame
4399 Exit Button (Push Plates) Installation & Operating Instructions
4390 Series Wall Switches (Press Plates) Installation Instructions
4397HP Jamb Switch Box Installation Instructions

Installation Instructions for 4380 Series Horn
Instructions for #3285 Surface Door/#3287 Concealed Door Status Switch
4399 Exit Button (Push Plates) Installation & Operating Instructions

Installation Instructions for 4370 Series Cylinder Key Switches
4399 Exit Button (Push Plates) Installation & Operating Instructions
4397HP Jamb Switch Box Installation Instructions

545 Alarm Kit Instructions

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for Freewheeling Lever Handle Control
Application Instructions for 814 S Series Outside Trim for 8888 and 8804
HC8800 and 12-HC8800 Rim Exit Mounting Shim Installation Instructions
INSTRUCTIONS FOR INSTALLING 8888, 12-8888, 8800, 12-8800, etc.
Installation Instructions for L980S Non-Fire Rate Mullion
55- Signal Switch for 80 Series Installation Instructions
57- Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
MSL Trim for 8804 Rim Type Exit Device
PSB,FSL,FSW Trim for 8804 Rim Type Exit Device
PTB Trim (812)
STS Trim (886/896)
STS Trim Design by 8804 Function
HC8800& 12-HC8800 Rim Type Exit Device w/704 x 710, 744 x 740 ET
HC8800 & 12-HC8800 Rim Type Exit Device w/713-8,715-8,743-8 ET
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 565 & 665 Metal End Cap Kit
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Exit Device End Cap Mounting Plate
Instruction Sheet for #607 Locking Slide Replacement Kit
Instruction Sheet for 668 Glass Bead Shim Kit for Narrow Stile 80 Exit Devices
Instruction Sheet for Keso Security System Removable Core Cylinder
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
601 Shim Kit
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
57- Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
Instructions for Mounting 80 Series Exit Device with Glass Bead Shim Kit
862/863/864 Pull Trim Installation Instructions
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
8500, 12-8500, AD8500 Narrow Design Rim Exit Device
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)
Metal and Wood Template 8500 & 12-8500
700-8 ET / NB-8700 Exit Device Trim
8500 used with 704 and 744 ET Control
8504 & 8510 Narrow Rim Type Exit Device (with Cylinder only)
Template 8500 Rim Exit Device by ET Control
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
657 Strike – Single Door Applications
658 Strike used with 650A Mullion
881 Monitor Strike for Rim Type Exit Device

545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
604 RUB STRIP INSTRUCTIONS
601 Shim Kit
8500, 12-8500, AD8500 Narrow Design Rim Exit Device
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)
Metal and Wood Template 8500 & 12-8500
700-8 ET / NB-8700 Exit Device Trim
8500 used with 704 and 744 ET Control
8504 & 8510 Narrow Rim Type Exit Device (with Cylinder only)
Template 8500 Rim Exit Device by ET Control
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
657 Strike – Single Door Applications
658 Strike used with 650A Mullion
881 Monitor Strike for Rim Type Exit Device

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for 565 & 665 Metal End Cap Kit
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Exit Device End Cap Mounting Plate
80 Series Exit Device LL Lever Handle Trim
Installation Instructions for Freewheeling Lever Handle Control
Instruction Sheet for #607 Locking Slide Replacement Kit
Instruction Sheet for 668 Glass Bead Shim Kit for Narrow Stile 80 Exit Devices
Instruction Sheet for Keso Security System Removable Core Cylinder
Instructions for General Strike Installation
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Instructions for Mounting #644 Double Door Strike
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
8800 & 12-8800 Series Rim Exit Devices (16/28/63/66 Functions) Installation Instructions
8893 Exit Device Inactive Trim Installation Instructions
Application Instructions for 814 S Series Outside Trim for 8888 and 8804
8888, 12-8888, 8800, 12-8800, WS8800, 12-WS8800, HC8800 and 12-HC8800 Series with Standard Trim
Instructions for Mounting #651 Stabilizer
12-980/EL980/L980 Mullion Holder Installation Instructions
601 Shim Kit
980 Mullion Installation Instructions
EL980 Electric Lockable Non-Fire Rated Mullion Installation Instructions
Installation Instructions for L980S Non-Fire Rate Mullion
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
57- Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
Instructions for Mounting 80 Series Exit Device with Glass Bead Shim Kit
862/863/864 Pull Trim Installation Instructions
688 Trim Retrofit Kit (for retrofit of Von Duprin 98/99 Series Rim Exit Device)
8895 Exit Device Active Trim Installation Instructions
Anti-Vandal Pull Trim (821/824/826/827) Installation Instructions
Applying PTB Design Outside Trim
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
8800/12-8800 & WS-8800/WS-12-8800 Rim Type Exit Device (04, 06, 10, 13, 15, 40, 43, 44, 46, 73, 74, 75, 76 Functions)
773-8/774-8/775-8/776-8 “ET” Control with 8800/12-8800 Rim Type Exit Device
700-8 ET / NB-8700 Exit Device Trim
Anti-Vandal ‘AVT’ Series Exit Trim
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
MSL Trim for 8804 Rim Type Exit Device
PSB,FSL,FSW Trim for 8804 Rim Type Exit Device
PTB Trim (812)
PTB Trim (832/842)
PTB Trim (Dummy Trim)
STS Trim (876)
STS Trim (886/896)
STS Trim Design by 8804 Function
8800/12-8800 Rim Type Exit Device (16, 28, 63, 66 Functions)
603/613 Strike
632 and 642 Strike
644 Double Door Strike
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
881 Monitor Strike for Rim Type Exit Device
700 ET TEMPLATE (Devices used with square spindles)
8893 Inactive (Dummy) Exit Device
8895 Active (Dummy) Exit Device

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for 565 & 665 Metal End Cap Kit
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Exit Device End Cap Mounting Plate
80 Series Exit Device LL Lever Handle Trim
Installation Instructions for Freewheeling Lever Handle Control
Instruction Sheet for #607 Locking Slide Replacement Kit
Instruction Sheet for 668 Glass Bead Shim Kit for Narrow Stile 80 Exit Devices
Instruction Sheet for Keso Security System Removable Core Cylinder
Instructions for General Strike Installation
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Instructions for Mounting #644 Double Door Strike
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
HC8800 and 12-HC8800 Rim Exit Mounting Shim Installation Instructions
INSTRUCTIONS FOR INSTALLING 8888, 12-8888, 8800, 12-8800, etc.
Instructions for Mounting #651 Stabilizer
12-980/EL980/L980 Mullion Holder Installation Instructions
601 Shim Kit
8888 Exit Device with 700-8 ET Control Application Instructions
Application Instructions for 814 S Series Outside Trim for 8888 and 8804
Latchbolt Stop for 8888 Zinc Chassis Installation Instructions
980 Mullion Installation Instructions
EL980 Electric Lockable Non-Fire Rated Mullion Installation Instructions
Installation Instructions for L980S Non-Fire Rate Mullion
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
57- Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
Instructions for Mounting 80 Series Exit Device with Glass Bead Shim Kit
862/863/864 Pull Trim Installation Instructions
688 Trim Retrofit Kit (for retrofit of Von Duprin 98/99 Series Rim Exit Device)
8895 Exit Device Active Trim Installation Instructions
Anti-Vandal Pull Trim (821/824/826/827) Installation Instructions
Applying PTB Design Outside Trim
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
8800/12-8800 & WS-8800/WS-12-8800 Rim Type Exit Device (04, 06, 10, 13, 15, 40, 43, 44, 46, 73, 74, 75, 76 Functions)
700-8 ET / NB-8700 Exit Device Trim
8888/12-8888 for use with LB,LJ,LL,LP Trim
MSL Trim for 8804 Rim Type Exit Device
PSB,FSL,FSW Trim for 8804 Rim Type Exit Device
STS Trim (886/896)
STS Trim Design by 8804 Function
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
881 Monitor Strike for Rim Type Exit Device

8300/12-8300 Series Mortise Lock Type Exit Device Installation Instructions
541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for 565 & 665 Metal End Cap Kit
Installation Instructions for Door Coordinator & Carry Bar
Instruction Sheet for #607 Locking Slide Replacement Kit
Instruction Sheet for 668 Glass Bead Shim Kit for Narrow Stile 80 Exit Devices
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
Instructions for Mounting #644 Double Door Strike
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
Application Instructions for 814 S Series Outside Trim for 8888 and 8804
HC8800 and 12-HC8800 Rim Exit Mounting Shim Installation Instructions
INSTRUCTIONS FOR INSTALLING 8888, 12-8888, 8800, 12-8800, etc.
Instructions for Mounting #651 Stabilizer
Latchbolt Stop for 8888 Zinc Chassis Installation Instructions
12-980/EL980/L980 Mullion Holder Installation Instructions
601 Shim Kit
980 Mullion Installation Instructions
EL980 Electric Lockable Non-Fire Rated Mullion Installation Instructions
Installation Instructions for L980S Non-Fire Rate Mullion
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
862/863/864 Pull Trim Installation Instructions
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
8300 & 12-8300 Narrow Design Mortise Lock Exit Device
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)
773/774/775/776 Solenoid Operated ET Control
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
PTB Trim (812)
PTB Trim (Dummy Trim)
STS Trim (876)
STS Trim (886/896)
Template 8300 8900 and 9900
815 Open Back Strike
Mortise Curved Lip or Straight Lip Strike (908,918)
700 ET TEMPLATE
59-MD8600 & 12-59-MD8600 CVR Exit Device – Electroguard

8300/12-8300 Series Mortise Lock Type Exit Device Installation Instructions
541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for 565 & 665 Metal End Cap Kit
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Exit Device End Cap Mounting Plate
Instruction Sheet for #607 Locking Slide Replacement Kit
Installation Instructions for Freewheeling Lever Handle Control
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
Instructions for Mounting 80 Series Exit Device with Glass Bead Shim Kit
862/863/864 Pull Trim Installation Instructions
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
Anti-Vandal Pull Trim (821/824/826/827) Installation Instructions
8900, 12-8900, WS8900 & 12-WS8900 Mortise Type Exit Device Installation Instructions
Wiring Instructions for 970 & 971 Electromechanical Mortise Exit Solenoid Locks to ElectroLynx Connector System
700 ET TEMPLATE
PTB Trim (812)
PTB Trim (832/842)
PTB Trim (Dummy Trim)
STS Trim (876)
STS Trim (886/896)
Template 8300 8900 and 9900
815 Open Back Strike
Mortise Curved Lip or Straight Lip Strike (908,918)
773/774/775/776 Solenoid Operated ET Control
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
Solenoid Operated Mortise Exit Device
8900/12-8900/WS-8900/WS-12-8900 Mortise Lock Exit Device
Anti-Vandal ‘AVT’ Series Exit Trim

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
8900, 12-8900, WS8900 & 12-WS8900 Mortise Type Exit Device Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
700 ET TEMPLATE
815 Open Back Strike
Template 8300 8900 and 9900
8900/12-8900/WS-8900/WS-12-8900 Mortise Lock Exit Device

639/640 Strike Instruction Sheet
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
AD8600/MD8600/12-MD8600/NB-MD8600/NB-12-MD8600 CVR Exit Device Installation Instructions
700-4 Solenoid Operated ET Trim
106 & 113 Auxiliary Control
AD8600 CVR TEMPLATE
640 STRIKE TEMPLATE
700-4 ‘ET’ Control for MD8600, 12-MD8600, 8400, and 12-8400

639/640 Strike Instruction Sheet
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
AD AND MD-8400 INSTRUCTIONS 8400/NB8400/12-MD8400/12-NB-MD8400 Narrow Concealed Vertical Rod Exit Device Installation Instructions (8400)
700-4 Solenoid Operated ET Trim
106 & 113 Auxiliary Control
640 STRIKE TEMPLATE
700-4 ‘ET’ Control for MD8600, 12-MD8600, 8400, and 12-8400
AD8400 Narrow Stile Concealed Vertical Rod Exit Device

639/640 Strike Instruction Sheet
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
773-6 and 774-6 “ET” Control with Reg and 12- SP/PP/PR/LS/LR-8600 Rim Type Exit Device

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for 565 & 665 Metal End Cap Kit
639/640 Strike Instruction Sheet
Installation Instructions for 106 & 113 Auxiliary Control for Concealed Vertical Rod Device
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Exit Device End Cap Mounting Plate
Installation Instructions for Freewheeling Lever Handle Control
Instruction Sheet for #607 Locking Slide Replacement Kit
Instruction Sheet for 668 Glass Bead Shim Kit for Narrow Stile 80 Exit Devices
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
AD AND MD-8400 INSTRUCTIONS 8400/NB8400/12-MD8400/12-NB-MD8400 Narrow Concealed Vertical Rod Exit Device Installation Instructions (8400)
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
Instructions for Mounting 80 Series Exit Device with Glass Bead Shim Kit
862/863/864 Pull Trim Installation Instructions
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)
700-4 Solenoid Operated ET Trim
106 & 113 Auxiliary Control
Template for strikes for concealed vertical rod exits
700-4 ‘ET’ Control for MD8600, 12-MD8600, 8400, and 12-8400
MD-8400 & 12-MD8400 Fire Concealed Vertical Rod Exit Device

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for 565 & 665 Metal End Cap Kit
Installation Instructions for 106 & 113 Auxiliary Control for Concealed Vertical Rod Device
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Exit Device End Cap Mounting Plate
Installation Instructions for Freewheeling Lever Handle Control
Instruction Sheet for #607 Locking Slide Replacement Kit
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
AD8600/MD8600/12-MD8600/NB-MD8600/NB-12-MD8600 CVR Exit Device Installation Instructions
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
862/863/864 Pull Trim Installation Instructions
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
Installation of Mortise Case Center Spring
700-4 Solenoid Operated ET Trim
106 & 113 Auxiliary Control
Template for strikes for concealed vertical rod exits
700-4 ‘ET’ Control for MD8600, 12-MD8600, 8400, and 12-8400
Metal and Wood Door Template For Thermal Pin Application
59-MD8600 & 12-59-MD8600 CVR Exit Device – Electroguard
MD8600 Panic & 12-MD8600 Concealed Vertical Rod Exit Deivce for Metal Doors

WD8600/12-WD8600/NB-WD8600/NB-12-WD8600 Concealed Vertical Rod Exit Device Installation Instructions
541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
639/640 Strike Instruction Sheet
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
Template for strikes for concealed vertical rod exits
Metal and Wood Door Template For Thermal Pin Application
700-4 Solenoid Operated ET Trim
106 & 113 Auxiliary Control for 12-WD8600 Concealed
700-4 ‘ET’ Control for 12-WD8600 Concealed Vertical Rod Exit Device
NB-WD8600 & 12-NB-WD8600 Concealed Vertical Rod Exit Device
WD8600/12-WD8600 Concealed Vertical Rod Exits

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
LP8600 X LR8600 & 12-LP8600 X 12-LR8600 (Double Egress & Double Doors) or LS8600 & 12-LS8600 (Single Door) Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
Template for strikes for concealed vertical rod exits
Metal and Wood Door Template For Thermal Pin Application

545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
INSTRUCTIONS FOR 8700,12-8700,HC-8700,HC4-8700
570 & 571 Rod Connector/Extension Kits Instructions
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top Plate & Bottom Strike for HC-8700,12-HC8700,FM-8700 & 12-FM,HC4,12-HC4- 8700 Exits
700 ET TEMPLATE

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for 565 & 665 Metal End Cap Kit
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Exit Device End Cap Mounting Plate
Installation Instructions for Freewheeling Lever Handle Control
Installation of Mortise Case Center Spring
Instruction Sheet for #607 Locking Slide Replacement Kit
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Thru-Bolt Instructions for 80 Series 8700,8800 and 8900
#576 Bottom Case Mounting Kit for 8700 Series Exit Device Installation Instructions
306 & 313 Auxiliary Control for 8700/12-8700/9700/12-9700 Vertical Rod Device Installation Instructions
INSTRUCTIONS FOR 8700,12-8700,HC-8700,HC4-8700
Thermal Pin Installation Instructions for Listed Doors with 12-NB/PP/PR/SP8700 Series Exit Devices
16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
43- Flush End Cap Rail Cutting Installation Instructions
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
Instructions for Mounting 80 Series Exit Device with Glass Bead Shim Kit
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
570 & 571 Rod Connector/Extension Kits Instructions
12-8700 Vertical Rod Exit Device
8700 Series Vertical Rod Exit Device
773/774/775/776 Solenoid Operated ET Control
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
PTB Trim (832/842)
PTB Trim (Dummy Trim)
STS Trim (876)
STS Trim (886/896)
306 AND 313 AUXILIARY CONTROL TEMPLATE
648 Flush Panel Strike for 8700 SVR Exit Device
881 Monitor Strike for Vertical Rod Type Exit Device
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top & Bottom Strike for 12-2727,12-3727,12-8700,12-9700 Exit Device
700 ET TEMPLATE
Metal and Wood Door Template For Thermal Pin Application

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
Thermal Pin Installation Instructions for Listed Doors with 12-NB/PP/PR/SP8700 Series Exit Devices
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
570 & 571 Rod Connector/Extension Kits Instructions
Instruction for installing NB306 and NB313 Auxiliary Control
NB8700 & 12-NB8700 Series Surface Vertical Rod Exit Device Installation Instructions
NB306 & NB313 AUXILIARY CONTROL TEMPLATE
NB8700 /12-NB8700 Top Latch Surface Vertical Rod Exit Device (for Pair or Double Egress Doors)
700-8 ET / NB-8700 Exit Device Trim
Template NB-8700 ET TRIM
NB8700 Top Latch Surface Vertical Rod Exit Device (for Single Doors)
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top & Bottom Strike for 12-2727,12-3727,12-8700,12-9700 Exit Device
Metal and Wood Door Template For Thermal Pin Application

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
306 & 313 Auxiliary Control for 8700/12-8700/9700/12-9700 Vertical Rod Device Installation Instructions
INSTRUCTIONS FOR 8700,12-8700,HC-8700,HC4-8700
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
570 & 571 Rod Connector/Extension Kits Instructions
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
PTB Trim (832/842)
PTB Trim (Dummy Trim)
STS Trim (876)
STS Trim (886/896)
306 AND 313 AUXILIARY CONTROL TEMPLATE
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top Plate & Bottom Strike for HC-8700,12-HC8700,FM-8700 & 12-FM,HC4,12-HC4- 8700 Exits

541 Shim Kit INSTALLATION INSTRUCTIONS
545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installing SARGENT 700, 700-4, 700-6, and 700-8 Lever Handle Control
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
55- Signal Switch for 80 Series Installation Instructions
58- Electric Dogging for 80 Series Installation Instructions
59- Electroguard Delayed Egress for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
570 & 571 Rod Connector/Extension Kits Instructions
Thermal Pin Installation Instructions for Listed Doors with 12-NB/PP/PR/SP8700 Series Exit Devices
FM8700, 12-FM8700 Surface Vertical Rod Exit Device Installation Instructions
Thermal pin Template for wood and metal door applications
HC8700 ,12-HC8700 & FM8700.12-FM8700 Vertical Rod Exit Device
700 ET TEMPLATE
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top Plate & Bottom Strike for HC-8700,12-HC8700,FM-8700 & 12-FM,HC4,12-HC4- 8700 Exits

Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
53- Latchbolt Monitor Switch for 80 Series Exit Devices Installation Instructions
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAIL (WIDE)
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)

Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instruction Sheet for #607 Locking Slide Replacement Kit
55- Signal Switch for 80 Series Installation Instructions
Installation Instructions for #855 Signal Switch Kit
Installation Instructions for 4370 Series Cylinder Key Switches
Installation Instructions for 4380 Series Horn
Instructions for #3285 Surface Door/#3287 Concealed Door Status Switch
TL- SARGuide Illuminated Touchpad Installation Instructions for 80 Series Exit Devices
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAIL (WIDE)
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)
881 Monitor Strike for Rim Type Exit Device

Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instruction Sheet for #607 Locking Slide Replacement Kit
Installation Instructions for #881 Monitor Strike
Installation Instructions for 4370 Series Cylinder Key Switches
Installation Instructions for M56/R56 Electric Latch Retraction Accessory Kit for use on 80 Series Exit Devices
Instruction Sheet for Remote Latch Retraction (80 Series Exit Devices)
Installation Instructions for 4241 Push Button
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAIL (WIDE)
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)
881 Monitor Strike for Rim Type Exit Device

57 & 59 Prefix for PCB module Assembly Instruction
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instruction Sheet for #607 Locking Slide Replacement Kit
Installation Instructions for #881 Monitor Strike
Instructions for #3285 Surface Door/#3287 Concealed Door Status Switch
TL- SARGuide Illuminated Touchpad Installation Instructions for 80 Series Exit Devices
57- Delayed Action 80 Series Exit Device Installation Instructions – for devices purchased before 2005
57- Delayed Action 80 Series Exit Device Installation Instructions
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAIL (WIDE)
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)

Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instruction Sheet for #607 Locking Slide Replacement Kit
Installation Instructions for #881 Monitor Strike
Instructions for #3285 Surface Door/#3287 Concealed Door Status Switch
TL- SARGuide Illuminated Touchpad Installation Instructions for 80 Series Exit Devices
Installation Instructions for 4370 Series Cylinder Key Switches
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAIL (WIDE)
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)

57 & 59 Prefix for PCB module Assembly Instruction
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instruction Sheet for #607 Locking Slide Replacement Kit
TL- SARGuide Illuminated Touchpad Installation Instructions for 80 Series Exit Devices
59- Electroguard Delayed Egress for 80 Series Exit Devices
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAIL (WIDE)
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)
8800/12-8800 & WS-8800/WS-12-8800 Rim Type Exit Device (04, 06, 10, 13, 15, 40, 43, 44, 46, 73, 74, 75, 76 Functions)
59-MD8600 & 12-59-MD8600 CVR Exit Device – Electroguard
59-8300/12-59-8300 Electroguard Mortise Exit Device

545 Alarm Kit Installation Instructions
Installation and Wiring Instructions for (TL-,53-,55-,56-) 80 Series Exit Device
Installation Instructions for 988/988CR/988Y Surface Bolt
Instructions for Installation and Wiring Remote Options to SARGENT AL-Prefix 80 Series Alarmed Exit Devices using the 546 Wiring Harness to ElectroLynx Connector System
Model #3267 Remote Power Unit for Profile Series Access Control & Exit Alarm Devices (with ElectroLynx Connector System)
TL- SARGuide Illuminated Touchpad Installation Instructions for 80 Series Exit Devices
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAIL (WIDE)
TEMPLATE ELECTRO-MECHANICAL EXIT DEVICE RAILS (NARROW)

9400 & 12-9400 Series Instructions
Cossbar exit Device Assembly Tag
9400 SERIES BRACKET MOUNTING, METAL DOOR TEMPLATE
9400 SERIES DOOR FACE MOUNTING, METAL DOOR TEMPLATE

9706, 10, 13, 15 Vertical Rod Exit Device Installation Instructions
Instructions for Mounting Flush Panel Top Strike
306 & 313 Auxiliary Control for 8700/12-8700/9700/12-9700 Vertical Rod Device Installation Instructions
Instruction Sheet for #607 Locking Slide Replacement Kit
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Freewheeling Lever Handle Control
570 & 571 Rod Connector/Extension Kits Instructions
9700,13-9700,14-9700,16-9700 Vertical Rod Device
90 & 12-90 Series Exit Device Thru-Bolt Application
9700 All Functions
773/774/775/776 Solenoid Operated ET Control
306 AND 313 AUXILIARY CONTROL TEMPLATE
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
PTB Trim (832/842)
STS Trim (876)
STS Trim (886/896)
12-9700 Vertical Rod Exit Device Template
881 Monitor Strike for Vertical Rod Type Exit Device
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top & Bottom Strike for 12-2727,12-3727,12-8700,12-9700 Exit Device
700 ET TEMPLATE

Cossbar exit Device Assembly Tag
Instruction Sheet for #607 Locking Slide Replacement Kit
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Freewheeling Lever Handle Control
Instruction Sheet for Keso Security System Removable Core Cylinder
Instructions for General Strike Installation
Instructions for Mounting #644 Double Door Strike
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
12-980/EL980/L980 Mullion Holder Installation Instructions
601 Shim Kit
980 Mullion Installation Instructions
EL980 Electric Lockable Non-Fire Rated Mullion Installation Instructions
9800 Rim Exit Device Instructions
Installing 9800 Series Rim Type Exit Device
9800/12-9800 Series Rim Type Exit Device (all functions)
90 & 12-90 Series Exit Device Thru-Bolt Application
773/774/775/776 Solenoid Operated ET Control
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
PTB Trim (832/842)
STS Trim (876)
STS Trim (886/896)
700 ET TEMPLATE
881 Monitor Strike for Rim Type Exit Device
603/613 Strike
644 Double Door Strike
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
9804,9813,9815,9816 Exit Device x thru bolted trim

Cossbar exit Device Assembly Tag
Instruction Sheet for #607 Locking Slide Replacement Kit
Installation Instructions for Door Coordinator & Carry Bar
Installation Instructions for Freewheeling Lever Handle Control
SARGENT Mortise Exit Device 9900 and 12-9900 Series Intallation Instructions
9900,16-9900 Exit Device with thru bolt outside trim
Solenoid Operated Mortise Exit Device
90 & 12-90 Series Exit Device Thru-Bolt Application
9900 and 12-9900 all Functions
773/774/775/776 Solenoid Operated ET Control
FLL/FLW Trim (894/833 or 884/843)
MAL Trim (828/838) Template
PTB Trim (832/842)
STS Trim (876)
STS Trim (886/896)
700 ET TEMPLATE
PTB Trim (812)
Template 8300 8900 and 9900
815 Open Back Strike
Mortise Curved Lip or Straight Lip Strike (908,918)

9800/12-9800 Series Rim Type Exit Device (all functions)
PTB Trim (832/842)
STS Trim (876)
STS Trim (886/896)
PTB Trim (812)
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
881 Monitor Strike for Rim Type Exit Device
Installing 9800 Series Rim Type Exit Device

541 Shim Kit INSTALLATION INSTRUCTIONS
Installation Instructions for 12-3727/12-NB3727 Fire Rated Series Vertical Rod Exit Device
Instructions for Mounting Flush Panel Top Strike
Instructions for Mounting Vertical Rod Exit Device with Glass Bead Shim Kit
Installation Instructions for Trim Installation (28-C/D/K/L/N-LL)
570 & 571 Rod Connector/Extension Kits Instructions
12-, NB, 12-NB-2727 and 3727 Vertical Rod Exit Device
28-C-TP Thumbpiece Trim
28-D-TP Thumbpiece Trim
28-GTB Outside Trim
28-K-HTB Outside Trim
28-L-TP Thumbpiece Trim
881 Monitor Strike for Vertical Rod Type Exit Device
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top & Bottom Strike for 12-2727,12-3727,12-8700,12-9700 Exit Device

Installation Instructions for Applying Thumbpiece Outside Trim for 20/30 Series
541 Shim Kit INSTALLATION INSTRUCTIONS
Instructions for General Strike Installation
Instructions for Mounting #644 Double Door Strike
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
Instructions for Mounting Vertical Rod Exit Device with Glass Bead Shim Kit
12-980/EL980/L980 Mullion Holder Installation Instructions
601 Shim Kit
980 Mullion Installation Instructions
EL980 Electric Lockable Non-Fire Rated Mullion Installation Instructions
3828 Series Rim Exit Device Installation Instructions
Installation Instructions for Trim Installation (28-C/D/K/L/N-LL)
12-2828 & 12-3828 Exit Device (with Knob or Lever Trim)
12-2828 and 12-3828 (with HTB & GTB Trim)
28-C-TP Thumbpiece Trim
28-D-TP Thumbpiece Trim
28-GTB Outside Trim
28-K-HTB Outside Trim
28-L-TP Thumbpiece Trim
2828 and 3828 (with HTB & GTB Trim)
3828 & 12-3828 with Lever Trim
603/613 Strike
644 Double Door Strike
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
881 Monitor Strike for Rim Type Exit Device

Installation Instructions for 12-2727 Fire Rated Series Vertical Rod Exit Device
541 Shim Kit INSTALLATION INSTRUCTIONS
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for Applying Thumbpiece Outside Trim for 20/30 Series
Installation Instructions for Trim Installation (28-C/D/K/L/N-LL)
Instructions for 20 Series Exit Device Thru-Bolt Application
Instructions for installing 2700 Series Vertical Rod Exit Device
Instructions for Mounting Flush Panel Top Strike
Instructions for Mounting Vertical Rod Exit Device with Glass Bead Shim Kit
570 & 571 Rod Connector/Extension Kits Instructions
12-, NB, 12-NB-2727 and 3727 Vertical Rod Exit Device
28-C-TP Thumbpiece Trim
28-D-TP Thumbpiece Trim
28-GTB Outside Trim
28-K-HTB Outside Trim
28-L-TP Thumbpiece Trim
3828 & 12-3828 with Lever Trim
Template for Top and Bottom Strikes for Non-Rated Surface Vertical Rob Exit Devices
Top & Bottom Strike for 12-2727,12-3727,12-8700,12-9700 Exit Device

541 Shim Kit INSTALLATION INSTRUCTIONS
Installation Instructions for 988/988CR/988Y Surface Bolt
Installation Instructions for Applying Thumbpiece Outside Trim for 20/30 Series
Installation Instructions for Trim Installation (28-C/D/K/L/N-LL)
Instructions for 20 Series Exit Device Thru-Bolt Application
Instructions for General Strike Installation
Instructions for Mounting #644 Double Door Strike
Instructions for Removal & Insertion of Removable Core Cylinders & Plastic Construction Plugs
Instructions for Mounting Vertical Rod Exit Device with Glass Bead Shim Kit
12-980/EL980/L980 Mullion Holder Installation Instructions
601 Shim Kit
980 Mullion Installation Instructions
EL980 Electric Lockable Non-Fire Rated Mullion Installation Instructions
Installation Instructions for 2828/12-2828 Rim Exit Device
12-2828 & 12-3828 Exit Device (with Knob or Lever Trim)
12-2828 and 12-3828 (with HTB & GTB Trim)
28-C-TP Thumbpiece Trim
28-D-TP Thumbpiece Trim
28-GTB Outside Trim
28-K-HTB Outside Trim
28-L-TP Thumbpiece Trim
2828 and 3828 (with HTB & GTB Trim)
3828 & 12-3828 with Lever Trim
603/613 Strike
644 Double Door Strike
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
881 Monitor Strike for Rim Type Exit Device
632 and 642 Strike

Alarmed Exit Device Thru-Bolt Application (5100/5800/12-5800)
Alarmed Exit Options (91/92/93/94- Prefixes)
Installation Instructions for #3274Narrow stile Mounting Plate
Installation Instructions for 5100 Alarmed Exit Device
Model #3267 Remote Power Unit for Profile Series Access Control & Exit Alarm Devices (with ElectroLynx Connector System)
Installation Instructions for Trim Installation (28-C/D/K/L/N-LL)
Remote Switch Installation (3285/3287 Status Switch)
Exit Alarm Operating Instructions (5100/5800/12-5800)
Installation Instructions for 5100 Series Alarmed Exit Lock (Using OB Knob/LL Lever Trim)
5100 Alarmed Exit Device
5100 Alarmed Exit Device with Trim
28-GTB Outside Trim
3828 & 12-3828 with Lever Trim
‘LL’ Type Lever Handle Trim

5300 Series Alarmed Exit Devices Installation Instructions
5300 Series Alarmed Exit Device
5300 Series Alarmed Exit Device
‘LL’ Type Lever Handle Trim

Alarmed Exit Device Thru-Bolt Application (5100/5800/12-5800)
Alarmed Exit Options (91/92/93/94- Prefixes)
Installation Instructions for #3275 Narrow stile Mounting Plate
Installation Instructions for Trim Installation (28-C/D/K/L/N-LL)
Model #3267 Remote Power Unit for Profile Series Access Control & Exit Alarm Devices (with ElectroLynx Connector System)
Remote Switch Installation (3285/3287 Status Switch)
Exit Alarm Operating Instructions (5100/5800/12-5800)
Installation Instructions for 5800 & 12-5800 Alarm Exit Device
Installation Instructions for 5800 & 12-5800 Series Alarmed Exit Devices w/OB Knob or LL Lever Trim
12-5800 Alarmed Exit Device
5800 Alarmed Exit Device
12-5800 Alarm Exit Device X “OB” or “LL” Trim
28-GTB Outside Trim
3828 & 12-3828 with Lever Trim
649 Strike – Single Door Applications
649 Strike for Double Door/Mullion Applications
‘LL’ Type Lever Handle Trim

650A Mullion Installation Instructions
650A Mullion
658 Strike used with 650A Mullion

651 Stabilizers Installation Instructions

Installation Instructions for 988/988CR/988Y Surface Bolt

12-HD980 MULLION STABILIZER
HC980, 12-HC980, HD980 and 12-HD980 Mullion Instruction Sheet

980 Mullion Installation Instructions
656 STRIKE TEMPLATE FOR MULLION APPLICATIONS
Template Metal Frame for Mullion 980 & L980

12-980/EL980/L980 Mullion Holder Installation Instructions
980S Non-Fire Rated Mullion Installation Instructions
12-980/12-L980/EL980/HC980/12-HC980/980S/l980S Mullion
656 STRIKE TEMPLATE FOR MULLION APPLICATIONS

EL980 Electric Lockable Non Fire-Rated Mullion Instructions

HC980, 12-HC980, HD980 and 12-HD980 Mullion Instruction Sheet
12-980/12-L980/EL980/HC980/12-HC980/980S/l980S Mullion

HC980, 12-HC980, HD980 and 12-HD980 Mullion Instruction Sheet
HC-L980 and HC-12-L980 Mullion Instruction Sheet
HC-L90 & HC-12-L980 Metal Template

HC980, 12-HC980, HD980 and 12-HD980 Mullion Instruction Sheet
12-980/EL980/L980 Mullion Holder Installation Instructions
L980 Model Mullion Installation Instructions
656 STRIKE TEMPLATE FOR MULLION APPLICATIONS
Template Metal Frame for Mullion 980 & L980

980S and 12-L980 Mullion Instruction Sheet
656 STRIKE TEMPLATE FOR MULLION APPLICATIONS
12-980/12-L980/EL980/HC980/12-HC980/980S/l980S Mullion